| Type | Ethernet |
| 10Base2 (BNC & Coax, ThinNet): | Yes |
| 10Base5 (AUI & Coax, ThickNet): | No |
| 10BaseT (RJ45 & UTP): | Yes |
| 100BaseTX (RJ45 & UTP): | No |
| SANA-II Driver: | Yes (ariadne.device and liana.device) |
| MNI Driver: | Yes (z2-am7990.mni) |
| Other Driver: | No |
The Ariadne is a full length Zorro II card with 32 Kbytes of buffer RAM on board and also an option for a boot EPROM. The Ariadne also includes two parallel ports, which are exactly the same as those found on the A4000. A SANA-II driver called Liana is also supplied for use with the parallel ports, as well as a parnet driver. There may also be a driver supplied for use with Amix, but this has not been confirmed.
Board Layout
_____________________________________________________________
| Parallel Port 2 1234 1 _____ |___
| ############ OOOO ::: | | |
| JP1 .. 1 LEDs LED |EPROM| |#
| Boot Connector| | |# DB25
| | | |# Parallel
| |_____| |# Port 1
| |#
| |
| #| RJ45
| #| 10BASE-T
| |_
| |_| BNC
|_____________________________________________________________| 10BASE-2
||||||||||||||||||||||||||| | Jumpers
JP1: Enable Boot ROM?
Off: Set to disable autobooting (default).
On: Set to enable autobooting from an on-board EPROM.
Connectors
LED connector
| Pin | Function |
|---|
| 1 | LED 1, Twisted pair MAU link status |
| 2 | LED 2, Transmit Status |
| 3 | +5V |
| 4 | LED 3, Collision |
| 5 | +5V |
| 6 | LED 4, Receive Status |