| Processor: |
020@14.32Mhz |
| FPU: |
Optional 68881 or 68882 (PGA or PLCC) at up to 50Mhz |
| MMU: |
None |
| Max Ram: |
Probably 4MB |
| Ram Type: |
1 x 72 pin SIMM slot. |
An accelerator which plugs into the CPU socket of the A500 and A2000. It probably works with the A1000 too, but his has not been confirmed*. The card requires an additional crystal if you intend to install an FPU, which allows the FPU to run at a clock speed independently from the processor. A 68000 can be installed onto the card as a fallback for old software that is incompatible. There have been problems reported when using this card with an A2091.
*it doesnt boot in 68020 mode, but if the jumper is set to 68000 mode it does boot (but chassis wont fit anymore)
Jumpers
| Jumper |
Open |
Closed |
| 1/4MB |
4MB Installed |
1MB Installed |
| Cache |
CPU Cache Enabled |
CPU Cache Disabled |
| 68000/68k |
020 Mode |
68000 Mode |
| Autoconfig |
Do not AutoConfig memory, use the AddMem utility |
Autoconfig Memory |
| CIA |
Default |
Only close this jumper if your Amiga crashes when it's open. |