| Type |
Ethernet |
| 10Base2 (BNC & Coax, ThinNet): |
Yes |
| 10Base5 (AUI & Coax, ThickNet): |
Yes |
| 10BaseT (RJ45 & UTP): |
Yes |
| 100BaseTX (RJ45 & UTP): |
No |
| SANA-II Driver: |
Yes |
| MNI Driver: |
Yes (z2-smc91c90.mni) |
| Other Driver: |
No |
Full length Zorro II ethernet card. This card was made both my Ameristar and CEI so therefore two different card ID's and manufacturer numbers may exist. The card has two LED's onboard, when in 10BaseT mode, red means transmit and green means receive. When it 10Base2/5 mode, the red LED indicates both receive and transmit and green is not used.
Jumpers
The card is shipped for use with 10Base 2 by default
| 10BaseT: |
Shunt JP3 plug OUT |
| 10Base2: |
Shunt JP3 plug IN and Shunt JP1 plug into THIN position |
| 10Base5: |
Shunt JP3 plug IN and Shunt JP1 plug into AUI position |
JP2 is for factory use only and should not be altered by the user.