Rank: Administration
Groups: Administrators
Joined: 3/2/2013(UTC)
Posts: 98
|
I received the following tip from BBoAH user Petri:
I attached pictures of my Real HD-Drive with Sony MPF920-E mechanism. I
discovered following things:
- Drive is jumpered as DS1 (default)
- Drive's cable pin34 is unmodified /DCD, the adaptor PCB moves it to
cable pin2
- Under the red silicone is two very thin wires, which easily snap to pieces
- IC2 (BA6986FS) has trace cut on pin16 (originally going to IC1 pin38)
- and IC2 pin16 is rewired to cable connector pin6*
- IC1 (CXA8061Q) pin38 is rewired to cable pin14*
- JC40 at cable pin4 has jumper resistor installed, which seems to be
usually missing in most of MPF920 pics. HD sense for the PAL chip?
* Most likely connection. I cut the wires to pieces (duh) when I removed
the silicone
--
Petri A. Räty
|
|
|
|
|
|
| Users browsing this topic |
|
Guest (3)
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.